Re: [Cialug] ipchains followup ?

[Jonathan Bailey <jonathan@xxxxxxxxx>]

Are your other machines set to use a gateway? The gateway address on the 
other machines should be the same as the IP for your firewall/router.


Jon


On Sunday 08 September 2002 01:28 am, you wrote:
> yuck..if you are still running RH 6.0 I would seriously upgrade, it was
> full of security holes.  Just turning on forwarding isn't enough, you
> also have to setup masquerading to do NAT, unless you have multiple real
> ip addresses from your ISP.
>
> Dan
>
> On Sat, 2002-09-07 at 15:34, Terry & Cheryl Haimann wrote:
> > It has occured to me that the problem may not be in my ipchains, but in
> > my networking setup.  Would a pc on my lan be able to communicate with
> > the internet through my linux box if I had no ipchains script disabled? 
> > As of yet, I have not been able to communicate with the internet from one
> > of the lan'ed pc's.  ip-forward is set to
> > 1("/proc/sys/net/ipv4/ip_forward".)
> >
> > I know that its not the Windows configuration, because when the p90(RH
> > 6.0) is the server, everything works.
>
> _______________________________________________
> Cialug mailing list
> Cialug@xxxxxxxxxx
> http://cialug.org/mailman/listinfo/cialug
_______________________________________________
Cialug mailing list
Cialug@xxxxxxxxxx
http://cialug.org/mailman/listinfo/cialug